background image

Instruction manual Wi3123

Please keep this instruction manual for future reference

18

USING THE FOOT SLIDERS

If you want to adjust the height over 820mm, please install the product using 
the foot sliders provided. These are provided to help prevent the feet catching on 
the floor when sliding the appliance into the aperture. Place the back foot in the 
location marked ‘Back’ below and the front foot in the location marked ‘Front’. 
Once fitted to both sides of the wine cabinet the appliance can be gently positioned 
into the aperture, taking care not to place excess pressure on the feet when 
locating the cabinet. 

(!a 

ccple 

USING THE FOOT SLIDERS 

If you want to adjust the height over 820mm, please install the product using 

the foot sliders provided. These are provided to help prevent the feet catching on 

the floor when sliding the appliance into the aperture.  Place the back foot in the 

location marked 'Back' below and the front foot in the location marked 'Front'. 

Once fitted to both sides of the wine cabinet the appliance can be gently positioned 

into the aperture, taking care not to place excess pressure on the feet when 

locating the cabinet. 

Back 

Foot  slider 

Please keep this instruction manual for future reference 

18 

Instruction  manual  Wi3123 

Wi3121 v.1ne cabinet.indd  18 

Front 

06/12/2016  10:551 

(!a 

ccple 

USING THE FOOT SLIDERS 

If you want to adjust the height over 820mm, please install the product using 

the foot sliders provided. These are provided to help prevent the feet catching on 

the floor when sliding the appliance into the aperture.  Place the back foot in the 

location marked 'Back' below and the front foot in the location marked 'Front'. 

Once fitted to both sides of the wine cabinet the appliance can be gently positioned 

into the aperture, taking care not to place excess pressure on the feet when 

locating the cabinet. 

Back 

Foot  slider 

Please keep this instruction manual for future reference 

18 

Instruction  manual  Wi3123 

Wi3121 v.1ne cabinet.indd  18 

Front 

06/12/2016  10:551 

Summary of Contents for WI3123

























Reviews: