Page
8
WDI1210 user manual.doc
TIMER DIAL
Used to select the wash cycles and to display them during operation.
To select the cycles, turn the dial clockwise until the mark coincides
with the selected cycle.
WARNING: Do not turn the timer dial while the machine is
energized. Do not turn the timer dial counterclockwise.
THERMOSTAT DIAL
To set the temperature, turn the dial until the mark coincides with the
selected temperature. It is used to regulate the washing temperature
from 30°C to 95°C based on the selected wash cycle and the type of
fabrics to be washed. It is recommended to follow the wash cycle
table. By turning the dial to this symbol
the machine will perform a cold wash cycle, which is particularly
indicated for delicate temperature-sensitive fabrics.
DRYING TIMER CONTROL
Enables you to select the drying time and temperature. When set on
the right-hand side, the drying cycle will be executed at a high
temperature with a maximum programmable temperature of over 130
min (for drying cotton and linen) while, when set on the left, the drying
cycle will be executed at a low temperature with a maximum time of 90
minutes (for drying synthetic and delicate fabrics).
To set the drying timer, turn the control clockwise so that the reference
mark is aligned with the selected drying time (The "drying program"
table contains instructions on how to choose the times, according to
your machine's spin-drying speed, the fabric to be dried and the
degree of dryness)
WARNING: -
Do not turn the timer control anticlockwise
.
DOOR OPENING KNOB
On the models where this function is provided, the door can be opened
simply by turning the knob either to the right or to the left.
WARNING!
If the washer-dryer is not used for a long period of time, the door may not open
spontaneously the first time when the handle is turned. In this case, turn the
handle and pull the door at the same time.