Page
7
WDI1210 user manual.doc
CONTROL PANEL
To become familiar with your machine
functions, compare the symbols on the control
panel with those described below.
ON/OFF
By pressing this button the machine turns on and executes the set wash cycle. It is
used to turn the Washer Dryer on and off.
POWER INDICATOR
When lit, it indicates that the washing machine is electrically energized.
HALF LOAD
This key has two functions:
It reduces the amount of water used in the wash and rinse cycles, thus providing
a considerable saving in the consumption of water, electricity & washing powder.
Use in cotton & linen cycles for washing a limited amount of dry clothes (MAX
2.5 kg).
DRYING:
It must always be pressed for the drying cycle to be executed.
DRYING INDICATOR LED
It lights up during the execution of a drying cycle.
STOP WITH WATER IN THE TANK
Can be used on the wool & delicate cycle.
The machine stops before draining the water, leaving the cloths to soak. To drain
the water and execute a short spin-dry cycle, release the key.
To drain water only, turn the timer control to the drainage cycle (see cycle table).
Always set the program with the machine switched off.
In both cases the machine ends the cycle automatically.
SPIN SELECTION BUTTON
By pushing this button (according to the model type) the
machine will perform the final spin at the maximum spin speed
setting (i.e.
850
-1000-1200-1300-1400).
It is used for
resistant fabrics so that there will be less water in the wash at
the end of the spin cycle.
SPINNING INDICATOR LIGHT
When lit it indicates that the final spin at the maximum rotation speed has
been selected.
850/1000
1200