7/27
4.2 Style B
•
“
”
Press it, the upper compartment setting temp will
decrease in 1
.
•
“
”
Press it , the lower compartment setting temp will
decrease in 1
.
•
“
”
Press it, the light on, press again, the light off, it is not effect by the door switch.
•
“
”
Press it, power on; press it and hold on for three seconds power off.
•
“
Left display
”
is upper chamber display.
•
“
Right display
”
is lower chamber display
l
The default setting temp of this wine cooler are upper compartment 6, lower compartment 12, but
when restart the wine cooler after power off, it will back to the former setting temp before
power off.
Notice:
According to customers
’
requirement, this wine cooler can be set to that the readout display
actual temp or setting temp.
a. In the readout display actual temp mode, press the
‘▲’
or
‘▼’
, the systems enter the
temperature setting mode and the setting temperature twinkling. Five seconds twinkling after
stopping adjust temperature, the readout stop twinkling and the readout show actual temperature,
the temperature setting mode end.
b.
In the readout display actual temp mode, press the
‘▲’
or
‘▼’
, the systems enter the
temperature setting mode and the setting temperature twinkling. Five seconds twinkling after
stopping adjust temperature, the readout stop twinkling and the readout show actual temperature,
the temperature setting mode end.
Notice: If any doubt, please refer to the user manual.
5.
How to diagnose the fault.
5.1
Fault finding by the self-check mode.
The wine cooler is controlled by
electronic Controller
, in order to maintain the wine cooler easily, there is a
self-check function in the control PCB.
