Caple WC6217, Technical Information

Page: 12 / 28

6/23
before power off.
l
According to customers ’ requirement, this wine cooler can be set to that the readout display
actual temp or setting temp.
a. The systems enter the temperature setting mode and the setting temperature twinkling. Five
seconds twinkling after stopping adjust temperature, the readout stop twinkling and the
readout show actual temperature, the temperature setting mode end.
b.
In the readout display actual temp mode, press the ‘▲’ or ‘▼’ , the systems enter the
temperature setting mode and the setting temperature twinkling. Five seconds twinkling
after stopping adjust temperature, the readout stop twinkling and the readout show actual
temperature, the temperature setting mode end.
5.
How to diagnose the fault.
5.1
Fault finding by the self-check mode.
The wine cooler is controlled by computer, in order to maintain the wine cooler easily, there is a
self-check function in the control PCB.
If you suspect that the control system fault, you can star the self-check mode by following below:
1 >
．
Power on the wine cooler, it will beep one sound, the wine cooler star, within 10 seconds after it star,
press the
‘ ▲’ and ‘▼’ at the same time and holding, three beep will sound, the systems
enter self-check mode.
The power indication light on.
The readouts show the actual temperatures.
The
“ Run ” light on.
The heater on and last for ten seconds
The LED light on.
The inner and outer fans running.
No response when touch the controlled button.
2>
．
If all tally with above description, the parts are normal. If any part failed, check the failed part and the
corresponding wiring and connection, if the wiring and connection is in good condition, replace the part
and check again, if it still failed, the default should be the control PCB, replace it with same model. (
→
6.2.1 )
3 >
．
The self-check can be quit only disconnect the power plug.