Instruction manual WC1800
10
11
Please keep this instruction manual for future reference
Instruction manual WC1800
Please keep this instruction manual for future reference
This symbol indicates the brightness adjuster: Hold the light key
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
for 3 seconds until
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
flashes. Then use the
CONTROL PANEL
AND OPERATION
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
the keys
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. Once the temperature reaches
the highest temperature value for the upper or lower zone, it will revert back to its lowest
temperature value.
Upper zone = 5-10ºC
Lower zone = 10-18ºC
Once the required temperature is selected, the
LED display
will
temporarily flash for 5
seconds, then
reverts
back to
the normal
display
, and the temperature is now set
.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
for 3 seconds until
This symbol indicates the brightness adjuster: Hold the light key
flashes. Then use the right hand side
keys to adjust the brightness of the internal light.
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
keys to adjust the brightness of the internal light.
This button is used to toggle between the different operational functions. When selected,
the relevant symbol will illuminate:
STANDARD MODE
Select this function to operate the wine cabinet in standard mode.
ECO MODE
An energy saving mode where both the inner light and control panel lights are off
(except the
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
indicator). The LED display is also switched off, until you change the
temperature using the
CONTROL PANEL
AND OPERATION
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
the keys
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. Once the temperature reaches
the highest temperature value for the upper or lower zone, it will revert back to its lowest
temperature value.
Upper zone = 5-10ºC
Lower zone = 10-18ºC
Once the required temperature is selected, the
LED display
will
temporarily flash for 5
seconds, then
reverts
back to
the normal
display
, and the temperature is now set
.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
for 3 s
econds until
This symbol indicates the brightness adjuster: Hold the light key
flashes. Then use the
right hand side
keys to adjust the brightness of the internal light.
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
and
CONTROL PANEL
AND OPERATION
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
the keys
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. Once the temperature reaches
the highest temperature value for the upper or lower zone, it will revert back to its lowest
temperature value.
Upper zone = 5-10ºC
Lower zone = 10-18ºC
Once the required temperature is selected, the
LED display
will
temporarily flash for 5
seconds, then
reverts
back to
the normal
display
, and the temperature is now set
.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
for 3 seconds until
This symbol indicates the brightness adjuster: Hold the light key
flashes. Then use the right hand side
keys to adjust the brightness of the internal light.
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
keys, this will be displayed for 5 seconds and then
switch off again. The compressor is also delayed 5 minutes in order to save energy.
INTELLIGENT MODE
In intelligent mode, the wine cabinet will adjust the fan speed according to the ambient
temperature. This will reduce noise levels and save energy.
DEMO MODE
When DEMO mode is selected, the compressor and PTC heater will be disabled, and the
fan input voltage reduces to 9V. The HI/LO temperature alarm is also disabled during
DEMO mode.
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either the
door has been left open for a long period of time, or the temperature has fluctuated too
high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
L OW E R Z O N E C O N T R O L PA N E L
Press this “
2
Ø
CONTROL PANEL (upper zone and middle zones)
Ø
CONTROL PANEL (Lower zone)
“
＋
＋
”
Press this button to increase the temperature by 1
º
C
“
－
”
Press this button to decrease the temperature by 1
º
C.
Lower zone = 10-18
º
C
•
How to replace the charcoal filter
“ button to increase temperature by 1ºC
Press this “
2
Ø
CONTROL PANEL (upper zone and middle zones)
Ø
CONTROL PANEL (Lower zone)
“
＋
＋
”
Press this button to increase the temperature by 1
º
C
“
－
”
Press this button to decrease the temperature by 1
º
C.
Lower zone = 10-18
º
C
•
How to replace the charcoal filter
“ button to decrease the temperature by 1ºC
2
Ø
CONTROL PANEL (upper zone and middle zones)
Ø
CONTROL PANEL (Lower zone)
“
＋
＋
”
Press this button to increase the temperature by 1
º
C
“
－
”
Press this button to decrease the temperature by 1
º
C.
Lower zone = 10-18
º
C
•
How to replace the charcoal filter
Lower zone: 10-18ºC
2
Ø
CONTROL PANEL (upper zone and middle zones)
Ø
CONTROL PANEL (Lower zone)
“
＋
＋
”
Press this button to increase the temperature by 1
º
C
“
－
”
Press this button to decrease the temperature by 1
º
C.
Lower zone = 10-18
º
C
•
How to replace the charcoal filter
TOUCH CONTROL KEYS
AND SYMBOLS
This button is used to toggle between the different operational functions. When selected, the
relevant symbol will illuminate:
Standard mode
- Select this function to operate the wine cabinet in standard mode.
ECO mode
- An energy saving mode where both the inner light and control panel
lights are off (except the indicator). The LED display is also switched off, until you
change the temperature using the and keys, this will be displayed for 5
seconds and then switch off again. The compressor is also delayed 5 minutes in order
to save energy.
Intelligent mode
- In intelligent mode, the wine cabinet will adjust the fan speed
according to the ambient temperature. This will reduce noise levels and save energy.
DEMO mode
- When DEMO mode is selected, the compressor and PTC heater will be
disabled, and the fan input voltage reduces to 9V. The HI/LO temperature alarm is
also disabled during DEMO mode.
Note:
Press and hold
and
for 3 seconds,
to change the display from ºC to ºF.
To switch the appliance on/off
.
P
ress and hold this button for approximately 1 second
to turn the appliance on.
Press and h
old this button for approximately 3 seconds
to turn the appliance off.
To turn
t
he lock function
on/off
.
Pr
ess and hold this button for approximately 3 seconds
to activate/deactivate.
When activated, the symbol will illuminate.
Press this button to raise the temperature in 1ºC increments. The highest temperature is 18ºC.
Once the required temperature is selected, the
LED display
will
temporarily flash for 5 seconds,
then
reverts
back to
the normal
display
, and the temperature is now set
.
Press this button
to
lower
the temperature in
1ºC increments. T
he lowest temperature is 5
ºC.
Once the required temperature is selected, the LED display will temporarily flash for 5 seconds,
it then reverts back to the normal display, and the temperature is now set.
This button is used to toggle between the different light functions. When selected, the relevant
symbol will illuminate:
The internal light will switch on when the door is opened, and off when the door is closed.
The internal light is continuously on. However after 3 minutes the light will dim.
The internal light will remain on for 10 minutes once the door is closed and then turn off.
This symbol indicates the brightness adjuster: Hold the light key for 3 seconds until
flashes. Then use the and keys to adjust the brightness of the internal light.
CONTROL PANEL AND OPERATION
The cooling symbol will illuminate to show when the wine cabinet is currently cooling.
The alarm symbol will illuminate to show the alarm is on. This will activate when either
the door has been left open for a long period of time, or the temperature has fluctuated
too high or low (HI or LO will also show in display to confirm this).
