10 Instruction manual ST523 / ST853
Please keep this instruction manual for future reference
I N S TA L L AT I O N
Before installing the appliance, make sure that none of the parts are damaged in any way. In
case of damaged parts, contact your retailer and do not proceed with installation.
Read all of the following instructions with care before installing the appliance:
› If venting the hood, use an air outlet pipe of the shortest possible length.
› Limit the number of pipe bends.
› Use a duct of recognised and approved material.
› Avoid any abrupt changes of direction and use a duct with a diameter of 150mm constant
over the entire length.
NOTE:
For more information on venting, please see our ‘Extraction & Ventilation guide’ available at
www.caple.co.uk
ATTENTION: AT LEAST TWO PEOPLE ARE NEEDED TO PERFORM THE INSTALLATION.
Before installing the appliance, in order not to damage the appliance itself, the metal grease
filter should be removed. This can be removed by pushing the special filter handle toward the
back side of the cooker hood and pulling it downwards so to unfasten it from its slot (Fig.3).
FIG.6
FIG.7
FIG.8
5
13
1
2
3
FIG.3
FIG.6
FIG.7
FIG.8
FIG.3