Instruction manual PH501E
Please keep this instruction manual for future reference
9
Gently lift up the end of the facia and unclip from the tabs at the opposite end of
the controller. Do not force the facia off as it could damage the location tabs.
Once the facia is removed you will see the 2 fixing holes to allow the unit to be
screwed onto the back box.
Once back plate has been screwed to the back box place the facia on the location
tabs and close the facia onto the back plate until it locks in place.
General information
Before handing over the installation to the user, always ensure that the system
responds correctly on all control programs and that other electrically operated
equipment and controls are correctly adjusted. Explain how to operate the controls
and hand over the operating instructions to the user.
Safety
- Do not handle the controller with wet hands
- Do not use the controller in rooms where excessive dust is generated or present.
- Ensure all apertures on the controller are kept clear always
- Do not cover the controller
- Do not use the controller if it is damaged
Specification
- Supply – 240VAC 50 HZ
Temperature Ac/- 1°C
- Maximum load current 10A
Temperature display range 5°C - 35°C
- Dimensions 86 x 86 x 14mm Temperature control accuracy
≤
1°C
PH501E Instruction manual.indd 9
16/07/2018 13:44