manualshive.com logo in svg

Caple PH501E, Instruction Manual, Page: 12 / 16

Share
Download
Caple PH501E Instruction Manual Download Page 12

Instruction manual PH501E

Please keep this instruction manual for future reference

12

4. Press the Clock button again. The day of the week display will now flash. Change 

the day using the Up and Down buttons.

5. Once complete press the Memory button

Setting the On and Off times

1.  Press the Time Period button so the time period is displayed on the screen.

2.   Press and hold the Memory button for 5 seconds. When the first On/Off period 

starts to flash release the button. 

3.   The room temperature display will now flash, Use the Up and Down buttons to 

set the room temperature you require during this time period.

4.   Press the Clock button. The time of day display will now flash, This is the time 

that the first time period will begin. Adjust the hour displayed using the Up 
and Down buttons.

5.   Press the clock button again. The minute display will now flash, adjust using 

the Up and Down buttons.

6.   To set the time you want the first time period to end, Press the Clock button. 

The second time period will flash, Press the Time Period button, the room 
temperature display will now flash, Use the Up and Down button to set the 
room temperature you require after the first period has ended.

7.   Press the Clock button. The time of day display will now flash, This is to set the 

time that the first time period will end. Adjust the hour displayed using the Up 
and Down buttons.

8.   Press the Cock button again. The minute display will now flash, adjust using 

the Up and Down buttons.

9.  Repeat processes 6, 7 and 8 to set the remaining 2 On/Off time periods.

10. Once all 3 time periods have been set press Memory.

PH501E Instruction manual.indd   12

16/07/2018   13:44

Summary of Contents for PH501E

















Reviews:

No comments