Instruction manual Di651
Please keep this instruction manual for future reference
43
POSITIONING THE APPLIANCE
Position the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is
equipped with water supply and drain hoses that can be positioned either to the
right or the left sides to facilitate proper installation.
HOW TO DRAIN EXCESS WATER FROM HOSES
If the sink waste is more than 1000mm from the floor, the excess water in hoses
cannot be drained directly into the sink. It will be necessary to drain excess water
from hoses into a bowl or suitable container that is held outside and lower than
the sink.
WATER OUTLET
Connect the water drain hose. The drain hose must be correctly fitted to avoid
water leaks. Ensure that the water inlet hose is not kinked or squashed.
EXTENSION HOSE
If you need a drain hose extension, make sure to use a similar drain hose. It must
be no longer than 4 metres; otherwise the cleaning effectiveness of the dishwasher
could be reduced.
SYPHON CONNECTION
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it
run into the sink, making sure to avoid bending or crimping it. The top of the hose
must be less than 1000mm from the floor.
START THE DISHWASHER
The following things should be checked before starting the dishwasher.
1. The dishwasher is level and fixed properly
2. The inlet valve is open
3. There is no leakage at the connection points
4. The wires are tightly connected
5. The power is switched on
6. The inlet and drain hoses are not knotted
7. All packing materials and printings should be taken out from the dishwasher
Di651 Intergrated Dishwasher.indd 43
08/02/2017 12:59
