Instruction manual Di642
28
Please keep this instruction manual for future reference
P R O G R A M M I N G T H E D I S H W A S H E R
S TA RT I N G A WA S H C Y C L E :
› Draw out the lower and upper basket, load the dishes and push them back. It is commended to
load the lower basket first, then the upper one.
› Pour in the detergent.
› Insert the plug into the socket. The power supply is 230 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
› Open the door, Press the Power button.
› Choose a programme, the response light will turn on. Then close the door, the dishwasher will
start its cycle.
C H A N G E T H E P R O G R A M M E
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent
may have already been released and the dishwasher may have already drained the wash water. If
this is the case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To
reset the dishwasher, follow the instructions below:
› Open the door a little to stop the dishwasher, after the spray arm stop working, you can open
the door completely.
› Press and hold the Programme button for 3-5 seconds. The machine will enter stand by mode.
› You can then change the Programme to the desired cycle setting.
F O R G OT TO A D D A D I S H
A forgotten dish can be added any time before the detergent dispenser opens.
› If this is the case, follow the instructions below:
› Open the door a little to stop the washing.
› After the spray arms stop working, you can open the door completely.
› Add the forgotten dishes.
› Close the door.
› The dishwasher will start running again.
WARNING:
It is dangerous to open the door mid-cycle, as hot steam may scald you.
