background image

Instruction manual DI631-2

Instruction manual DI631-2

14

15

Please keep this instruction manual for future reference 

Please keep this instruction manual for future reference 

1.  After the lower basket has been removed, unscrew and remove the cap from the  

salt container.

 

2. Place the end of the funnel (supplied) into the hole and insert about 1.5kg of dishwasher salt. 

3.  Fill the salt container with water. It is normal for a small amount of water to come out of the 

salt container. 

4. After filling the container, screw the cap tightly back on, turning clockwise.

5. The salt warning light will turn off after the salt container has been filled with salt.

6.  Immediately after filling the salt into the salt container, a washing programme should be started. 

Otherwise the filter system, pump or other important parts of the machine may be damaged by 
salty water. 

NOTE: 

 ›  The salt container must only be refilled when the salt warning light in the control panel comes 

on. Depending on how well the salt dissolves, the salt warning light may still be on even 
though the salt container is filled.

 › If salt has spilled, run a soak or rapid programme to remove it.

L O A D I N G  T H E   S A LT   I N TO  T H E   S O F T E N E R

Always use salt intended for use with dishwashers.

The salt container is located beneath the lower basket and should be filled as explained in  
the following:

WARNING:

 ›  Only use salt specifically designed for the use in dishwasher. Every other type  

of salt not specifically designed for the use in a dishwasher, especially table salt, will damage 
the water softener. In case of damages caused by the use of unsuitable salt the manufacturer 
does not give any warranty nor is liable for any damages caused. 

 ›  Only fill with salt just before running a cycle. This will prevent any grains of salt or salty water, 

which may have been spilled, remaining on the bottom of the machine for any period of time, 
which may cause corrosion.

Contact your local water board for information on the hardness of your water supply.

NOTE:

The hardness of the water varies from place to place. If hard water is used in the dishwasher, 
deposits will form on the dishes and utensils.

The appliance is equipped with a special softener that uses a salt container specifically 
designed to eliminate lime and minerals from the water.

Summary of Contents for DI631-2


























Reviews: