Instruction manual DI631
Instruction manual DI631
42
43
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
T Y P E
P R O B L E M
P O S S I B L E C AU S E S
W H AT TO D O
NOISE
Knocking noise in
the wash cabinet
A spray arm is knocking against
an item in
a basket
Interrupt the programme, and rearrange the items which
are obstructing the spray arm.
Rattling noise in the
wash cabinet
Items of crockery are loose in
the wash cabinet
Interrupt the programme, and rearrange the items
of crockery.
Knocking noise in
the water piped
This may be caused by on-site
installation or the cross-section
of the piping
This has no influence on the dishwasher function.
If in doubt, contact a suitably qualified plumber.
UNSA
TISF
A
CT
OR
Y W
ASHING
RESUL
TS
The dishes are
not clean
The dishes were not
loaded correctly
See notes in “Loading the Dishwasher Baskets“.
The programme was not
powerful enough
Select a more intensive programme. See” Wash
Cycle Table “.
Not enough detergent
was dispensed
Use more detergent, or change your detergent.
Items are blocking the path of
spray arms
Rearrange the items so that the spray can rotate freely.
The filter combination in the
base of wash cabinet is not
clean or is not
correctly fitted.
This may cause the spray arm
jets to get blocked.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See “Cleaning the Spray Arms”.
Cloudiness on
glassware
Combination of soft water and
too much detergent.
Use less detergent if you have soft water and select a
shortest cycle to wash the glassware and to get
them clean.
Black or grey marks
on dishes
Aluminium utensils have rubbed
against dishes.
Use a mild abrasive cleaner to eliminate those marks.
Detergent left in
dispenser cups
Dishes block detergent cups.
Re-loading the dishes properly.
T Y P E P R O B L E M
P O S S I B L E C AU S E S
W H AT TO D O
UNSA
TISF
A
CT
OR
Y DR
YING RESUL
TS
The dishes are
not drying
Improper loading
Load the dishwasher as suggested in the directions.
Too little Rinse Aid
Increase the amount of Rinse Aid/refill the Rinse Aid dispenser.
Dishes are removed
too soon
Empty the lower basket first and then the upper one. This will avoid
water dripping from the upper basket onto the dishes in the
lower one.
Wrong programme has
been selected
In short programme the washing temperature is lower.
This also lowers cleaning performance. Choose a programme with
a long washing time.
Use of cutlery with a low-
quality coating
Water drainage is more difficult with these items. Cutlery or dishes
of this type are not suitable for washing in
the dishwasher.
E R R O R C O D E S
When some malfunctions occur, the appliance will display error codes to warn you:
WA R N I N G :
»
If overflow occurs, turn off the main water supply before calling a service.
»
If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
C O D E S
M E A N I N G S
P O S S I B L E C AU S E S
The rapid light flickers quickly
Longer inlet time.
Faucet is not opened, or water intake is restricted, or
water pressure is too low
The ECO light flickers quickly
Overflow.
Some element of the dishwasher leaks.
