18 Instruction manual Extraction Motors
Please keep this instruction manual for future reference
I N S TA L L AT I O N :
Place the appliance under the downdraft, corresponding to
the air outlet, as shown in (Fig.19).
All fittings are supplied with the appliance, along with
a rectangular pipe that connects the downdraft to the
DDMEXT28.
The appliance air outlet shall be connected to the cabinet
in such a way that the air sucked in from the kitchen can
be recirculated back into the room. This can be by means of
reducing the plinth height around the whole island unit to
allow air to escape into the room or by means of a vent in
the plinth. Ducting to be connected from the DDMEXT28 to
an air outlet grille/vent is not supplied with the appliance and
should be purchased separately.
It is possible to direct the product air outlet according to your installation requirements, by
rotating the air outlet flange as shown in (Fig.20).
The appliance is equipped with a 7-meter-long power cable, to be connected to the downdraft
hood in the specific terminal board found inside the plastic black box (Fig.21).
With reference to the Energy Label standard and taking into account its performances, it is not
necessary to equip the product with any time control device.
FIG.19
DDMEXT28
This product has been designed to be installed under a kitchen
cabinet, corresponding to the downdraft lower air outlet. This
product can work only if it is used in combination with a Caple
downdraft.
This product is designed to efficiently exhaust fumes and
odours. We recommend you use the product in Recirculation
Mode only and to use a constant diameter piping of 150mm or
similar sections.
We also recommend using ducting without elbows, as they
negatively affect the performance of the appliance.
FIG.20
INSTALLATION:
Place the appliance under the downdraft, corresponding to the air
outlet, as shown in (Fig.19).
All fittings are supplied with the appliance, along with a
rectangular pipe that connects the downdraft to
the DDMEXT28.
The appliance air outlet shall be connected to the cabinet in such
a way that the air sucked in from the kitchen can be recirculated
back into the room. This can be by means of reducing the plinth
height around the whole island unit to allow air to escape into the
room or by means of a vent in the plinth. Ducting to be connected
from the DDMEXT28 to an air outlet grille/vent is not supplied
with the appliance and should be purchased separately.
DDMEXT
It is possible to direct the product air outlet according to your installation requirements, by rotating the air outlet flange as
shown in (Fig.20).
The appliance is equipped with a 7-meter-long power cable, to be connected to the downdraft hood in the specific terminal
board found inside the plastic black box (Fig.21).
With reference to the Energy Label standard and taking into account its performances, it is not necessary to equip the product
with any time control device.
FIG.21
FIG.19
DDMEXT28
This product has been designed to be installed under a kitchen
cabinet, corresponding to the downdraft lower air outlet. This
product can work only if it is used in combination with a Caple
downdraft.
This product is designed to efficiently exhaust fumes and
odours. We recommend you use the product in Recirculation
Mode only and to use a constant diameter piping of 150mm or
similar sections.
We also recommend using ducting without elbows, as they
negatively affect the performance of the appliance.
FIG.20
INSTALLATION:
Place the appliance under the downdraft, corresponding to the air
outlet, as shown in (Fig.19).
All fittings are supplied with the appliance, along with a
rectangular pipe that connects the downdraft to
the DDMEXT28.
The appliance air outlet shall be connected to the cabinet in such
a way that the air sucked in from the kitchen can be recirculated
back into the room. This can be by means of reducing the plinth
height around the whole island unit to allow air to escape into the
room or by means of a vent in the plinth. Ducting to be connected
from the DDMEXT28 to an air outlet grille/vent is not supplied
with the appliance and should be purchased separately.
DDMEXT
It is possible to direct the product air outlet according to your installation requirements, by rotating the air outlet flange as
shown in (Fig.20).
The appliance is equipped with a 7-meter-long power cable, to be connected to the downdraft hood in the specific terminal
board found inside the plastic black box (Fig.21).
With reference to the Energy Label standard and taking into account its performances, it is not necessary to equip the product
with any time control device.
FIG.21
Summary of Contents for DDMEXT21
Page 19: ...NOTES ...