Caple DDMEXT21, Instruction Manual, Page: 16 / 20

16 Instruction manual Extraction Motors
Please keep this instruction manual for future reference
C O N N E C T I N G T H E D U C T I N G :
The appliance has an air inlet to connect the ducting
to an air outlet.
After fixing the appliance to the external wall, use
rigid ducting to connect the motor to the appliance
(Fig.16C).
Ducting and fixings are not provided and are to be
supplied by the installer.
E L E C T R I C A L C O N N E C T I O N TO T H E H O O D :
Connect the external motor’s cable to the terminal board found inside the plastic box of the
wiring. Make sure to respect the colours of cables when performing the electrical connection
(Fig.17).
In order to avoid water ingress, apply silicone to the product perimeter, close to the wall.
I N S TA L L I N G T H E S TA I N L E S S - S T E E L E X T E R N A L B O DY:
Refit the stainless-steel body again, by matching the air exhausting grid with the air outlet of
the motor block (Fig.18).
CONNECTING THE DUCTING:
The appliance has an air inlet to connect the ducting to an
air outlet.
After fixing the appliance to the external wall, use rigid
ducting to connect the motor to the appliance (Fig.16C).
Ducting and fixings are not provided and are to be supplied
by the installer.
ELECTRICAL CONNECTION TO THE HOOD:
Connect the external motor’s cable to the terminal board
found inside the plastic box of the wiring. Make sure to
respect the colours of cables when performing the electrical
connection (Fig.17).
In order to avoid water ingress, apply silicone to the product perimeter, close to the wall.
INSTALLING THE STAINLESS-STEEL EXTERNAL BODY:
Refit the stainless-steel body again, by matching the air exhausting grid with the air outlet of the motor block (Fig.18).
FIG.16
FIG.18
DDMEXT
FIG.17
CONNECTING THE DUCTING:
The appliance has an air inlet to connect the ducting to an
air outlet.
After fixing the appliance to the external wall, use rigid
ducting to connect the motor to the appliance (Fig.16C).
Ducting and fixings are not provided and are to be supplied
by the installer.
ELECTRICAL CONNECTION TO THE HOOD:
Connect the external motor’s cable to the terminal board
found inside the plastic box of the wiring. Make sure to
respect the colours of cables when performing the electrical
connection (Fig.17).
In order to avoid water ingress, apply silicone to the product perimeter, close to the wall.
INSTALLING THE STAINLESS-STEEL EXTERNAL BODY:
Refit the stainless-steel body again, by matching the air exhausting grid with the air outlet of the motor block (Fig.18).
FIG.16
FIG.18
DDMEXT
FIG.17