41
Correct replacement of the burners
It is very important to check that the burner flame distributor F and the cap C has been
correctly positioned (see fig. 11.1-11.2) - failure to do so can cause a poor burner flame
and/or damage to the burner and hob.
Check that the electrode “S” (fig. 11.1) is always clean to ensure trouble-free sparking.
Check that the probe T (fig. 11.1) next to each burner is always clean to ensure correct
operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Triple ring burners
The triple ring burner must be correctly positioned (see fig. 11.5); the burner rib must
be enter in their logement as shown by the arrow see fig. 11.3).
Then position the cap A and the ring B (fig. 11.4 - 11.5).
The burner correctly positioned must not rotate (fig. 11.4).
Fig. 11.3
Fig. 11.4
A
B
Fig. 11.5
Summary of Contents for CR 13400
Page 47: ...47 ...
