Instruction manual CM465SS
16
17
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual CM465SS
EN 15
USE
3. Lift the central lid, place one measure of preground coffee in the
funnel push the appliance back and proceed as described in the
section “Making coffee using coffee beans”. You can make just one
coffee at a time by pressing the ‘One cup deliver’ touch key (10).
4. After using the machine with pre-ground coffee, to go back to
making coffee using beans, deactivate the pre-ground coffee
function by pressing the ‘Coffee strength’ touch key (6).
Notes
• Never introduce pre-ground coffee when the machine is off
as
it
could spread through the inside of the appliance.
• Never add more than 1 measure, otherwise the appliance will not
make the coffee.
• Use the measure provided only.
• Introduce only pre-ground coffee for espresso coffee machines into
the funnel.
• If more than one measure of pre-ground coffee is used and the
funnel clogs, push the coffee down with a knife then remove and
clean the brewing unit and machine as described in the “Cleaning
the brewing unit” section.
Preparing hot water
Hot water can be used to warm up cups and to make hot drinks, such
as tea or packet soups.
Warning! Escaping hot water can lead to scalds! Only activate the
hot water nozzle when there is a receptacle underneath it.
1. Put the hot water nozzle in place.
2. Place a container underneath the hot water nozzle.
3. Press the ‘Hot water’ touch key (13).
The display shows “HOT WATER PRESS OK”.
4. Press the touch key ‘OK’ (9).
Hot water is dispensed; the display shows “HOT WATER”.
Once the programmed amount of hot water is dispensed,
dispensing stops automatically.
For a few seconds the display shows “PLEASE WAIT”. After that the
appliance is ready to make coffee again and the last selected coffee
setting appears on the display.
EN 15
USE
3. Lift the central lid, place one measure of preground coffee in the
funnel push the appliance back and proceed as described in the
section “Making coffee using coffee beans”. You can make just one
coffee at a time by pressing the ‘One cup deliver’ touch key (10).
4. After using the machine with pre-ground coffee, to go back to
making coffee using beans, deactivate the pre-ground coffee
function by pressing the ‘Coffee strength’ touch key (6).
Notes
• Never introduce pre-ground coffee when the machine is off
as
it
could spread through the inside of the appliance.
• Never add more than 1 measure, otherwise the appliance will not
make the coffee.
• Use the measure provided only.
• Introduce only pre-ground coffee for espresso coffee machines into
the funnel.
• If more than one measure of pre-ground coffee is used and the
funnel clogs, push the coffee down with a knife then remove and
clean the brewing unit and machine as described in the “Cleaning
the brewing unit” section.
Preparing hot water
Hot water can be used to warm up cups and to make hot drinks, such
as tea or packet soups.
Warning! Escaping hot water can lead to scalds! Only activate the
hot water nozzle when there is a receptacle underneath it.
1. Put the hot water nozzle in place.
2. Place a container underneath the hot water nozzle.
3. Press the ‘Hot water’ touch key (13).
The display shows “HOT WATER PRESS OK”.
4. Press the touch key ‘OK’ (9).
Hot water is dispensed; the display shows “HOT WATER”.
Once the programmed amount of hot water is dispensed,
dispensing stops automatically.
For a few seconds the display shows “PLEASE WAIT”. After that the
appliance is ready to make coffee again and the last selected coffee
setting appears on the display.
N OT E S :
1. Never introduce pre-ground coffee when the machine is off as it
could spread through the inside of the appliance.
2. Never add more than 1 measure, otherwise the appliance will not
make the coffee.
3. Use the measure provided only.
4. Introduce only pre-ground coffee for espresso coffee machines into
the funnel.
5. If more than one measure of pre-ground coffee is used and the funnel
clogs, push the coffee down with a knife then remove and clean the
brewing unit and machine as described in the “Cleaning the brewing
unit” section.
P R E PA R I N G H OT WAT E R
Hot water can be used to warm up cups and to make hot drinks, such as
tea or packet soups.
WA R N I N G :
Escaping hot water can lead to scalds! Only activate
the hot water nozzle when there is a receptacle underneath it.
1. Put the hot water nozzle in place.
2. Place a container underneath the hot water nozzle.
3. Press the ‘Hot water’ touch key (13). The display shows “HOT WATER
PRESS OK”.
4. Press the touch key ‘OK’ (9).
Hot water is dispensed; the display shows “HOT WATER”.
Once the programmed amount of hot water is dispensed, dispensing
stops automatically.
For a few seconds the display shows “PLEASE WAIT”. After that the
appliance is ready to make coffee again and the last selected coffee
setting appears on the display.
The machine is set by default to automatically delivery 150ml of hot
water. To change these quantities, proceed as follows:
1. Place a container underneath the water spout.
2. Press the touch key ‘MENU’(2) to enter the menu
3. Press the Scroll touch keys (5 and 7) until “PROGRAM HOT WATER”
is displayed.
4. Press the touch key ‘OK’ (9) to confirm.
5. Select the required quantity of water by pressing scroll touch keys (5
and 7). The progress bar shows the quantity of water selected.
6. Press the touch key ‘OK’ (9) to confirm (or the ‘Return’ touch key (3) to
cancel the operation.
7. Press the ‘Return’ touch key (3) to exit the menu.
8. The appliance is now reprogrammed with the new settings
and is ready.
M A K I N G C A P P U C C I N O
The machine is set by default to automatically delivery a standard
cappuccino.
1. Select the taste of the coffee you want to use to make the cappuccino
by pressing the ‘Coffee strength’ touch key (6).
2. Remove the lid of the milk container.
3. Fill the container with about 100ml of milk for each cappuccino to be
prepared. Never exceed the MAX level (corresponding to about 750ml)
marked on the container. You should ideally use skimmed or semi
skimmed milk at refrigerator temperature (about 5°C).
4. Make sure the intake tube is correctly inserted in the rubber washer.
Then replace the milk container lid.
5. Position the frothed milk regulator (N2) between the words
CAPPUCCINO and CAFFELATTE printed on the milk container lid.
6. The quantity of froth can be adjusted by moving the regulator towards
the word CAFFELATTE for a denser froth. Moving it towards the word
CAPPUCCINO obtains a less dense froth.
EN 16
USE
Changing the quantity of hot water
The machine is set by default to automatically delivery 150ml of hot
water. To change these quantities, proceed as follows:
1. Place a container underneath the water spout.
2. Press the touch key ‘MENU’(2) to enter the menu
3. Press the Scroll touch keys (5 and 7) until “PROGRAM HOT WATER”
is displayed.
4. Press the touch key ‘OK’ (9) to confi rm.
5. Select the required quantity of water by pressing scroll touch keys (5
and 7). The progress bar shows the quantity of water selected.
6. Press the touch key ‘OK’ (9) to confi rm (or the ‘Return’ touch key (3)
to cancel the operation.
7. Press the ‘Return’ touch key (3) to exit the menu.
8. The appliance is now reprogrammed with the new settings
and is ready.
Making cappuccino
The machine is set by default to automatically delivery a standard
cappuccino.
1.
Select the taste of the coffee you want to use to make the
cappuccino by pressing the ‘Coffee strength’ touch key (6).
2.
Remove the lid of the milk container.
3.
Fill the container with about 100
ml
of milk for each cappuccino
to be
prepared. Never exceed the MAX level (corresponding to
about
750ml) marked on the container. You should ideally use
skimmed or
semi skimmed milk at refrigerator temperature (about 5°C).
4.
Make sure the intake tube is correctly inserted in the rubber washer.
Then replace the milk container lid.
5.
Position the frothed milk regulator (N2) between the words
CAPPUCCINO and CAFFELATTE printed on the milk container lid.
6.
The quantity of froth can be adjusted by moving the regulator
towards the word CAFFELATTE for a denser froth. Moving it towards
the word CAPPUCCINO obtains a less dense froth.
7.
Remove the hot water spout and attach the milk container to the
nozzle.
8.
Position the milk spout and then place a sufficiently large cup under
the coffee and milk spouts.
2
2
1
C H A N G I N G T H E Q UA N T I T Y O F H OT WAT E R
