Instruction manual CM465SS
22
23
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual CM465SS
W AT E R H A R D N E S S
A “PLEASE DESCALE!” message is displayed after the appliance has been operated for a factory
set period of time, calculated on the basis of the maximum quantity of lime scale which may
be contained in the water used. If necessary, this period of operation can be extended, making
descaling less frequent, by programming the appliance based on the actual lime content in the
water used. Proceed as follows:
1. Remove the “Total Hardness Test” strip that comes included in the instruction manual set. Dip it
fully in the water for a few seconds. Remove it and wait 30 seconds until its colour changes and
a number of red dots are formed. For example, if there are 3 red dots on the test strip, you must
set the water hardness level to 3.
If you no longer have a water hardness test, this information can be obtained from the local
water hardness board.
2. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option “WATER
HARDNESS” appears. Confirm the menu option with the touch key ‘OK’.
3. The display shows the current setting. Press the scroll touch keys until the established hardness
level is displayed. Confirm the selection with the touch key ‘OK’. The appliance is now
programmed to provide the descaling warning when necessary, based on the actual hardness of
the water.
S E T T I N G T H E C O F F E E T E M P E R AT U R E
You can choose between three temperature levels. The coffee temperature levels are
defined as follows:
»
TEMPERATURE LOW
»
TEMPERATURE MEDIUM
»
TEMPERATURE HIGH
The factory setting is TEMPERATURE HIGH.
You can change this as follows:
1. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option
“TEMPERATURE” appears. Confirm the menu option with the touch key ‘OK’.
2. The display shows the current setting. Select another temperature with the scroll touch keys.
When the desired temperature is displayed, confirm it with the touch key ‘OK’.
S E T T I N G T H E S W I T C H - O F F T I M E
The appliance is set by default to go off automatically 30 minutes after the last coffee has been
made. To change this interval (max. 120 min), proceed as follows:
- AUTO SHUTOFF TIME 1/2 hour
- AUTO SHUTOFF TIME 1 hour
- AUTO SHUTOFF TIME 2 hour
You can change this as follows:
1. Press the touch key ‘MENU’ and press the scroll touch keys until the menu option “AUTO
SHUTOFF TIME” appears. Confirm the menu option with the touch key ‘OK’.
2. Select another switch-off time with the scroll touch keys. When the desired switch-off time is
displayed, confirm it with the touch key ‘OK’.
