Instruction manual CM465SS
36
37
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual CM465SS
T R O U B L E S H O OT I N G
If the appliance does not work properly, this does not always mean that it is defective. If the coffee
machine does not work and a message is displayed, refer to the problem solving information
in the ‘Messages’ section. If no message is displayed, try to find a solution first by checking the
points mentioned in the table below, or contact our Caple service department
FAU LT
C AU S E
S O L U T I O N
Coffee is not hot.
The cups were not preheated.
Preheat the cups by rinsing them out with warm
water (see “Tips to make hotter coffee”).
The brewing unit is too cold.
Warm up the brewing unit with the rinsing
program before making coffee (see “Rinsing”).
The coffee does not have
enough crema.
The coffee is too coarsely ground.
Turn the knob for the grind level setting one
position anticlockwise (see “Setting the grind
level”).
The coffee blend is not suitable.
Use a coffee blend suited to fully automated
coffee machines.
Coffee comes out too
slowly.
The coffee is ground too fine.
Turn the knob for the grind level setting one
position clockwise (see “Setting the grind
level”).
Coffee comes out too
quickly.
The coffee is too coarsely ground.
Turn the knob for the grind level setting one
position anticlockwise (see “Setting the grind
level”).
Coffee only comes out of
one of the spouts on the
coffee dispenser.
The holes on the spouts are blocked.
Remove the dry coffee residues with a needle
(see “Cleaning the coffee machine”).
FAU LT
C AU S E
S O L U T I O N
Coffee is not hot.
The cups were not preheated.
Preheat the cups by rinsing them out with warm
water (see “Tips to make hotter coffee”).
The brewing unit is too cold.
Warm up the brewing unit with the rinsing
program before making coffee (see “Rinsing”).
The coffee does not have
enough crema.
The coffee is too coarsely ground.
Turn the knob for the grind level setting one
position anticlockwise (see “Setting the grind
level”).
The coffee blend is not suitable.
Use a coffee blend suited to fully automated
coffee machines.
Coffee comes out too
slowly.
The coffee is ground too fine.
Turn the knob for the grind level setting one
position clockwise (see “Setting the grind
level”).
Coffee comes out too
quickly.
The coffee is too coarsely ground.
Turn the knob for the grind level setting one
position anticlockwise (see “Setting the grind
level”).
Coffee only comes out of
one of the spouts on the
coffee dispenser.
The holes on the spouts are blocked.
Remove the dry coffee residues with a needle
(see “Cleaning the coffee machine”).
The machine does not
switch on when the on/
stand by button is pressed
The main switch on the right side of
the appliance is not switched on or
the mains plug is not plugged in.
Check that the main switch is in the ‘ON’
position and that the power lead is plugged in
the socket properly.
