Instruction manual C772G
Please keep this instruction manual for future reference
15
GAS CONNECTION
Note:
The hob should be connected to the gas supply by a gas safe registered installer.
Make sure that the appliance is adjusted for the gas type available (see the
label under the appliance). Follow the instructions indicated in the chapter “gas
transformations and adjustments” for the possible adaptation to different gases.
The appliance must be connected to the gas system with rigid metal pipes or
flexible steel pipes having continuous walls, in compliance with the regulations in
force. A conical connector for the gas supply is included (Fig.7 and Fig.7.A).
Please select the type which is correct for the supply concerned. The connection
must not stress the gas ramp. Once the installation is over, check the connection
seal with a soapy solution.
ELECTRIC CONNECTION
The connection to the household mains supply must be carried out by qualified
personnel and in conformity with the regulations in force. The voltage of the
electrical system must correspond to the value indicated on the label under the
appliance. Make sure that the electrical system is provided with an effective ground
connection in compliance with the regulations and provisions of the law.
GROUNDING IS COMPULSORY.
This device must be at a suitable opening distance from the contacts in order to
allow the entire disconnection in case of overvoltage category III, in accordance with
fig 7
fig 7.A
