7
Instruction manual C2600
Please keep this instruction manual for future reference
-
The electrical system of this appliance may be used
safely only when it is correctly connected to an
efficient earthing system in compliance with the safety
standards currently in effect.
I N S T A L L A T I O N W A R N I N G S :
-
Prior to installation, ensure that the local distribution
conditions (electricity voltage and frequency) and the
requirements of the appliance are compatible.
-
During installation the oven must be completely
disconnected from the mains electricity supply.
-
Do not operate the appliance before it is fully installed.
-
The appliance must be installed by an
authorised technician.
-
Caple is not responsible for any damage that may
be caused by defective placement and installation by
unauthorised persons.
-
When unpacking the appliance, make sure that it is not
damaged during transportation.
-
Check the oven for any damage, such as misaligned
or bent door, damaged door seals and sealing surface,
broken or loose door hinges and latches and dents
inside the cavity or on the door.
-
In the case of any defect; do not use the appliance and
contact your retailer or Caple Service immediately.
-
Ensure that the supply cord is not wedged during the
installation. If the supply cord is damaged, it must
be replaced by a Caple service technician or similarly
qualified persons in order to prevent a hazard.