Caple C1081G Instruction Manual Download Page 4

Page: 4 / 40

Instruction manual C981G & C1081G

Please keep this instruction manual for future reference

Alterations to the domestic wiring system must only be

made by a qualified electrician.

Failure to follow this advice could be fatal or seriously injure

the user.

CUT HAZARD

If you choose to use a ceramic hob scraper, the razor blade

is exposed when the safety cover is retracted. Use with

extreme care and always store safely and out of reach of

children.

Failure to use caution could result in injury or cuts.

Take care - panel edges are sharp. Failure to do so may

result in injury or cuts.

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions carefully before installing or using

this appliance.

No combustible materials or products should be placed on

this appliance at any time.

Please make this information available to the person

responsible for installing the appliance.

In order to avoid a hazard, this appliance must be installed

according to these instructions.

This appliance is to be installed correctly and earthed only

by a suitably qualified person.

This appliance should be connected to a circuit which

incorporates an isolating switch providing full disconnection

from the power supply.

Summary of Contents for C1081G









































Search results

Summary of Contents for C1081G

Reviews:

Related manuals for C1081G

Brands by name

Popular brands

Caple C1081G, Instruction Manual

Search results

Summary of Contents for C1081G

Reviews:

Related manuals for C1081G

Brands by name

Popular brands