Caple C1081G Page 35 Instruction Manual Download | Manualshive

Page: 35 / 40

background image

35

Instruction manual C981G & C1081G

Please keep this instruction manual for future reference

Now it will be possible to increase or decrease the minimum flow, use the “+” and “-” buttons of the

specific burner. After this action the test is repeated automatically.

After adjusting the burner, press the timer button again to exit the procedure. The minimum flow
settings are saved and will be used each time you use the appliance.

You can repeat this procedure for all burners.

To exit, turn the device off by pressing the on / off button.

1

90

Now it will be possible to increase or decrease the minimum flow, use the “+” and “-” buttons of the

specific burner. After this action the test is repeated automatically.

After adjusting the burner, press the timer button again to exit the procedure. The minimum flow
settings are saved and will be used each time you use the appliance.

You can repeat this procedure for all burners.

To exit, turn the device off by pressing the on / off button.

1

90

Now it will be possible to increase or decrease the minimum flow, use the “+” and “-” buttons of the

specific burner. After this action the test is repeated automatically.

After adjusting the burner, press the timer button again to exit the procedure. The minimum flow
settings are saved and will be used each time you use the appliance.

You can repeat this procedure for all burners.

To exit, turn the device off by pressing the on / off button.

1

90

Now it will be possible to increase or decrease the minimum flow, use the “+” and “-” buttons of the

specific burner. After this action the test is repeated automatically.

After adjusting the burner, press the timer button again to exit the procedure. The minimum flow
settings are saved and will be used each time you use the appliance.

You can repeat this procedure for all burners.

To exit, turn the device off by pressing the on / off button.

1

90

Now it will be possible to increase or decrease the minimum flow, use the “+” and “-” buttons of
the specific burner. After this action the test is repeated automatically.

After adjusting the burner, press the timer button again to exit the procedure. The minimum flow
settings are saved and will be used each time you use the appliance.

You can repeat this procedure for all burners.

To exit, turn the device off by pressing the on / off button.

«
...
33
34
35
36
37
...
»

Summary of Contents for C1081G









































Reviews:

No comments

Related manuals for C1081G

Brand: Cylinda Pages: 28

Brand: K&H Pages: 17

Brand: Baumatic Pages: 26

Brand: Belling Pages: 28

Brand: Siemens Pages: 20

Brand: Siemens Pages: 12

Brand: Siemens Pages: 16

Brand: Siemens Pages: 28

Brand: Siemens Pages: 98

Brand: inventum Pages: 32

Brand: inventum Pages: 76

Brand: Caple Pages: 8

Brand: Caple Pages: 25

Brand: Electrolux REX Pages: 24

Brand: Faber Pages: 124

Brand: Essentials Pages: 28

Brand: ARTHUR MARTIN Pages: 60

Brand: CORBERO Pages: 55

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands