By clicking on "Pitch" or "Roll" you can switch between the two usable axes.
In total there are four movements that the device detects:
Pitch: Lift toe (1) or lift heel (2)
Roll: Tilt to the left (3) or tilt to the right (4)
By clicking the gray boxes, key commands can be assigned via a menu and
corresponding inclination angles can be defined:
In the above example, the M key is pressed at an inclination angle of 5° on
pitch axis 1 (lift toes).
Up to a tilt angle of 15°, the M key remains pressed.
If the tilt angle falls below 5° or exceeds 15°, the key is released.
15
16
