8
EN
SAFETY INSTRUCTIONS
Note
: The helmet is specially designed for protection when cycling,
skateboarding and rollerblading. It must not be used for other sports or for
motorcycling.
• Check the helmet for visible defects at regular intervals.
• After any hard impact, blow or deep scratch, the helmet must be replaced
as it will lose its protective effect. Even after several years of use without
damage or if the helmet no longer fits properly, it should be replaced
• All chemicals, paints or stickers can seriously impair the protective effect
of the helmet.
• Clean the helmet only with lukewarm water, mild soap and a soft cloth.
• Allow the helmet to air dry after each use.
• High temperatures, as low as 60 °C, can seriously damage the helmet.
Uneven helmet surfaces and blistering are signs of such damage.
Helmets that bear the suffix "inmold" have a heat resistance of up to
80 °C. Do not store the helmet behind glass panes, for example in a car, or
near heating or heat sources.
• For disposal of the helmet, please contact your local waste disposal
company.
•
Modification or removal of original parts of the helmet can extremely
impair the protective effect. The helmet must not be modified to
incorporate additives in a manner not recommended by the manufacturer.
• Note that despite the correct adjustment, a helmet cannot always protect
you from all injuries.
WARNING
Risk of strangulation! Make sure that your children remove
their helmets before entering a children's playground. The
helmets must not be worn by children when climbing or
playing other games as there is a risk of strangulation!!!!
