56
EN
Step 5
Required Hardware
Type
Illustration
Qty.
A
Screw
Button Head Socket Bolt
4
B
Washer
Toothed washer (Ø10)
1
C
Nut
Truss head Phillips screw
1
Remove the console from its packaging. Slide 2 screws through the holes
on the left pulse sensor bar and the console holder. Make sure that the
screws and washers are well seated and slightly tightened. Repeat the step
to attach the right side of the console. Remove the left earthing wire from
the bracket and attach it with parts B, C to the uncoated square holes of the
square tube.
Connect the sensor cable to the
console on both sides of the pulse
sensor bar. Connect the cable to the
connection cable on the console.
