![CAPITAL SPORTS 10032931 Manual Download Page 53](http://html.mh-extra.com/html/capital-sports/10032931/10032931_manual_2553584053.webp)
53
EN
Step 2
Required Hardware
Type
Illustration
Qty.
A
Screw
Button Head Socket Bolt
4
B
Washer
Flat washer (Ø10)
4
C
Nut
Nylon nuts (M10)
4
Connect the console cables: Pull the cable through the right stand of the
post. Pull the cable out of the right stand and attach it to the top of the
stand. Then remove the auxiliary wire. Place the right post on the frame.
Attach the post to the frame with part A, B & C (2 pieces each). Make sure
that all screws and washers are in place and tighten them lightly. Repeat the
steps for the left post.
Note: Tighten the screws only after mounting the front pulse sensor bar.
Take care not to damage the sensor cables during installation.
Console
cable
Hex wrench
Open wrench