TUTA-GW2 user manual
（
Version:V1.4)
27
•
A Driver Program needs to be installed on computer before you check the
recording. Installing instructions please refer to the attached disk.
•
After the driver software is installed, connect the camera with computer via USB
cable (make sure the camera is turned on), after several seconds, your
computer will detect removable disk automatically, click the disk to check
recording images and video.
Note
: Under the removable disk mode, all the images and video won
’
t be saved in
TF card. When you finish checking the recording, the camera must be
disconnected with computer, turned off the power switch, and turned on again to
restore the TF card recording function.
Chapter 6 Maintenance
•
Store and use the remote camera in suitable temperature. Too high or too low
temperature will likely to damage the camera.
•
Try to keep the the camera and all its accessories dry. Do not store and use it in
the bathroom, or other place with high humidity. Do not allow pour water or
other liquids into the camera, otherwise, it might cause malfunctions.
•
Do not store and use the camera in dusty.
•
Do not use alcohol, acetone and other similar solvents to clean it. Wipe it with
soft-wet cloth.
•
Do not attempt to open it except as instructed. If the camera does not work
normally, try to resolve it as the guide of the "general troubleshooting", if to the
problem can not be solved, contact with the dealer immediately.
•
To prolong the life-span of the battery, connect the camera the camera to the
power supply to charge the built-in Lithium battery for 4 hours every 3 months if
the camera does not use for long time. Charge the battery at least 12 hours at
the first time use to achieve the full performance of the battery.
Chapter 7 General troubleshooting
No.
General Trouble
Possible Reason
Solution
1
Camera can
’
t send
MMS images
MMS functions of the
SIM/USIM card do not
active, insufficient fee of the
SIM/USIM card, wrong MMS
Contact network provider to
active SIM card function. Pay for
the card. Ask network provider
to offer correct MMS parameters
