23/04/2019
Rev 3
57
necessary to keep the inlet hermetically shut. This phase lasts at most 11 seconds. At the end of
this phase, a diagnosis of “Leak present” or “Leak absent” is given. Push “OK” key to exit.
The presence of a leak disables measurement until a new test is carried out with a final result of
“Leak absent”.
V.4.5.Routine check
This page shows operational data from the gas measurement cell. Gas pressure, ambient
temperature, temperature of lamps and detectors. Also gives the Bench software version as well
as its serial number.
All these data can be useful to your maintainer.
