EN
Press the sensor button to activate the
screen. Then tap it a few more times to
open the ECG section of the menu.
Press and hold the sensor button to
start ECG measurement. After starting
the function, move your finger to the
ECG contact and hold it there until the
measurement is completed. The mea-
surement process is displayed on the
screen with a stylized ECG diagram.
If the measurement is successful, at the end of the
measurement, the device will inform you that the
result has been sent to the smartphone. In case of
failure, it will display an error message.
B) Starting a measurement
via the app:
Go to the Canyon Life app,
select and start “ECG mea-
surement”. On the screen the
menu for ECG measurement
will be opened.
Put the watch on your hand,
touch the contact for ECG
measurement with the index
finger of your other hand (without the watch) and
hold this finger there until the end of the measure
-
ment (30-60 seconds). The measurement process is
displayed on the smartphone screen with a stylized
ECG diagram.
