manualshive.com logo in svg

CanyCom CM 2103, Operator'S Manual, Page: 49 / 62

Share
Download
CanyCom CM 2103 Operator'S Manual Download Page 49

Maintenance

- 43 -

Adjust the adjusting nut to make the spring length 92 mm.

7.8.2  Blade Rotary V-Belt

Spring

Adjustment nut

Engine pulley

DrivingVbelt

HST pulley

5314M-0708-010E

Blade pulley

Engine pulley

Rotary V-belt 

Guide “A”

Guide “B”

Adjustment nut “C”

Spring “D”

5314M-0708-020E

7.8  Adjustments

7.8.1  Driving V-Belt

*  Perform maintenance without changing V-belt 

tension.  Adjust V-belt tension only after it slips. 

Inspecting V-belt

Visually check for damage on V-belt.  Replace any damaged 

V-belt.

Adjusting V-belt

Inspecting V-belt

Visually check for damage on V-belt.  Replace any 

damaged V-belt.

Adjusting V-belt

After replacing V-belt, make adjustment as follows ;

1.  Set the clearance “A” between the V-belt and the guides 

“A” and “B” at 2 to 4 mm

2.  Shift the blade clutch lever to "ON", loosen the adjusting 

nut “C”, and adjust the length of the spring D to 160 

mm.  Then, tighten the adjusting nut “C”.

Summary of Contents for CM 2103































































Reviews:

No comments