Maintenance
- 37 -
7.4.4 HST Oil
3. Replace the drain plug.
4. Open the cap and pour proper amount of designated oil
into oil port.
Inspection/Adding Oil
1. Park the machine on level ground.
2. Remove the oil checking plug and check the level of HST
oil in the HST oil tank. When level is below the specified
value, open the cap of the oil tank and add HST oil until it
reaches the oil checking plug position.
Oil to be used : See page 32
Amount of HST oil : Fill to "oil checking plug
position" level when oil is cold
Replacing Oil
1. Position a suitable container to collect drained oil under
drain plug.
2. Remove the drain plug and drain oil.
Oil level gauge
Cap
Drain plug
HST oil tank
5314M-0601-010E
* Dispose of the drained oil properly.
* Control oil flow to avoid overflows.
