40W267 Keslinger Road
PO BOX 393
LaFox, IL 60147-0393 USA
A Division of Richardson Electronics
Web
www.canvys.com |
Phone
888.735-7373 |
Fax
630.
208.2350
Rev. 2/09
Connect the monitor to the computer using an HD 15-pin VGA cable. Secure the cable connectors by
tightening the screws on both sides of the plug.
Basic operation
Connect the required external source equipment to the monitor before following these procedures.
Info
The on-screen display (OSD) is automatically preset to English. To change the OSD Display language, refer to
the OSD Menu Function on page 12.
A. Connecting the Power Cable
Connect the power cord to the power cord connector on the side of the monitor. Plug the power cord into
an AC wall socket and press power switch to “
│
” to power on, or “
○
” to power off the monitor.
B. Turning Power On
Once power switch is “on” (see above), press the Power ON button on the side of the monitor or remote
control.
C. Selecting Input Source
To select the Input Source for the monitor, press the SOURCE button on the control panel or press the
desired source key on the remote control, or pressing the AUTO key on the remote control will cycle to the
next active source input.
D. Turning Power Off
To turn off the monitor, press the Power OFF button on the control panel or remote control.
Using the Menu Screen
The image and display settings can be adjusted through the MENU as listed on the control panel or remote
control using the following procedures:
