32
REPLACING THE BATTERY
DANGER!
Do not crush, puncture or dismantle the battery pack. Do not allow
the battery pack to get hot or place it near a heat source. Do not
place a naked flame on the battery pack. Do not short-circuit the
battery pack. Do not immerse the battery pack in liquid.
REMOVING THE BATTERY
FITTING THE BATTERY
CORRECT DISPOSAL OF BATTERIES FOR THIS PRODUCT
1. Make sure the power switch is OFF and that the adapter is disconnected from the wall socket.
2. Unscrew the screws on the battery lid (use a screwdriver).
3. Remove the battery lid and lift the battery out.
4. Disconnect the lead that connects the battery to the robot vacuum cleaner.
1. Only fit an original battery of the correct model, supplied by the ELON Group.
2. Connect the battery's contact to the contact in the robot's battery compartment.
Note: Make sure the contact is the right way round. The red and black cable on the battery must be connected to
the red and black cable on the robot vacuum cleaner.
3. Insert the battery in the battery compartment. Make sure the battery is secure and that the cables are not stretched
or pinched.
4. Fit the battery lid.
5. Fit the battery lid's screws (use a screwdriver).
(Applies to countries with a separate battery recycling system)
The marking on the battery, user manual or packaging indicates that the battery in this product must not be disposed of
with domestic waste. The chemical symbols Hg, Cd, or Pb indicate that the battery contains mercury, cadmium or lead
in concentrations that exceed the reference levels of Directive 2006/66/EC.
For more detailed information on correct waste disposal of this product or batteries, please contact your local council
offices, your waste recycling facility or the dealer where you bought the product.
GB
