26
English
If ECO is selected, all wirelessly connected speakers will be powered down automatically, but each speaker must be powered up individually� This is the
operation mode with the lowest standby power consumption� All the other modes Network, Auto, and Manual provide an automatic power up function for all
wirelessly connected speakers when powering up the Sound M (Master Device)� You can find additional information in the description in the "Sub Output" and
"Wireless Speaker Pairing" part�
Notes: • If the standby mode is set to Auto [AUT] and the Soundbar is set to standby mode using the “ON/Standby” key of the remote control, it is not possible
for the Soundbar to switch on automatically� To use the Auto mode of the Soundbar as intended, do not power down the Soundbar using the
On/Standby key but always wait until the Soundbar powers down, automatically�
• To avoid an unintentional power-up of the Soundbar using the analog input (e�g� by humm), the threshold value has been set quite high� To make sure
the
Sound M powers up correctly, please set the output level of your analog audio source to a high level (but not more than 2Vrms)�
To set the standby mode, please do the following:
1
To enter the menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button�
3
Choose the function Standby Mode [STB] using the
" "
or " " button and confirm with the "OK" button.
4
Use the "+" or "-" button to select the wanted Standby mode and confirm with the "OK" button�
5
Press the "M" button to exit this menu item�
Input Config [INP]
With the default factory setting all physically available inputs are already assigned with a source designation� Therefore, the device display and the
screen do not show the designation of the (physical) input, but the designation of a (possible) source device (e�g� [BDP])� These are as follows:
Physical input
OSD
Display Name
HDMI
®
Input 1
HDMI1
[HD1] = BDP
(Blu-ray player)
HDMI
®
Input 2
HDMI2
[HD2] = SAT
(Satelite receiver)
HDMI
®
Input 3
HDMI3
[HD3] = PS
(Gaming console)
HDMI
®
Output
ARC
[ARC] = TV
(TV)
Optical digital input
OPT
[OPT] = CD
(CD player)
Coax digital input
COAX
[COA] = DVD (DVD player)
Analog line input L/R
Analog
[LIN] = AUX
(Analog device)
