24
English
7
If the code could not be learned, [FAI] appears briefly on the display resp� FAIL appears on the screen to indicate that no code has been stored�
In this case, [HD1] will still be displayed� In this case the system jumps back into the IR Menu to the item Direct Input Learn [DIL]� Please increase or
decrease the distance between the Sound M and the TV-/Universal remote and repeat the process� Alternatively you can try to press the buttons of the
TV-/universal remote longer or less long�
8
If you do not want to assign a button to input BDP [HD1], you can select the (next) desired input by pressing the " " button�
The " " button takes you to the previous input�
9
If you do not press any button on the TV-/universal-remote control within 15 seconds, the system returns to the IR Menu�
10
The BT input is the last entry in the list� By pressing the " " button again, the system jumps back to the IR menu�
Note: Due to the variety of infrared codes it is not possible to guarantee that every IR remote control signal can be learned by the Sound M�
Signals from radio frequency (RF) remote controls cannot be learned, generally!
IR Clear [CLR]
Use this function to delete all learned IR codes stored on the Sound M�
To delete the IR commands learned by the Sound M, please do the following:
1
To enter the Menu, press the "M" button.
2
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button�
3
Use the
" "
or " " button to select the IR Menu [IRM] and confirm with the "OK" button�
4
Choose the function IR Clear [CLR] and press the "OK" button� The OSD shows the IR Clear menu and "No" is selected� The display indicates [NO]�
5
To cancel the operation, press the "M" button or press the "OK" button�
6
To delete stored codes please use the " " button to select "Reset All", the display shows [YES]� Please press the "OK" button to delete the codes�
7
The screen will display "Please Wait" for 3 seconds� The system will then return to the IR menu� The display confirmes the deletion by showing [CLR]�
CEC [CEC]
Consumer Electronics Control is a cross-market standardized protocol for controlling devices connected to the HDMI® inputs/outputs� The device is
supplied with this function activated [ON]�
The CEC functions supported by the Sound M are:
- One touch Play: By pressing the “Play” button of the Blu-Ray player the Soundbar switches on automatically and changes to the
corresponding HDMI® input�
