52
53
English
English
IR delete function
to delete the tV remote control commands learned by the DM system you need to follow these steps:
1
Switch the Soundbar on.
2
Press the “ON/Standby” key on the Soundbar remote
control for approx. 5 seconds.
3
the display will flash
IRL
.
4
Press the “Mute” key of the Soundbar remote control
for approx. 5 seconds.
5
the display will show
CLR
for approx. 5 seconds. the Soundbar
will then switch automatically back to normal operation.
Exit menu
Press and hold the “ON/Standby” key again for longer than 5 seconds to exit the “iR learning function” menu. if the
Soundbar does not receive any input instructions from the remote control within a period of 60 seconds the menu navigati-
on returns to normal mode automatically.
Direct selection of the signal inputs
in addition to the
Input
and
Input
function, you can directly select the signal inputs tV, DVD, AuX and Bluetooth®
when using your tV or universal remote control. that means you can allocate the desired input to a key on your remote
control.
1
While you are still in the iR learning menu
IRL
,
press one of the input keys on the Canton remote
control for 3 seconds to access the direct selection menu.
DVD
flashes in the display.
2
You can now allocate the “DVD” input to a key on your
tV remote control.
Note:
if you press this key on the remote control while
the speaker is in normal mode, the DM system switches
directly to the DVD input.
3
Press the desired key on the remote control. if the inf-
rared (iR) code has been successfully stored by the DM
system,
OK
appears briefly in the display followed
by the next input
TV
.
4
if the code has not been stored or if you do not press
any key on your remote control within 10 seconds,
FAI
appears briefly in the display to indicate that no
code has been stored.
DVD
, then flashes again in the
display and you can store the code for the DVD input,
once again.
5
if you do not want to allocate a key to the DVD input,
briefly press the
Input
key to manually access the
TV
input.
6
to allocate the tV, AuX and/or Bluetooth
®
inputs to a
key on your remote control, repeat steps 2 to 5.
7
to exit the direct selection menu, press one of the two input keys again for 3 se-
conds to access the higher level iR learning menu
IRL
. if you press the “ON/
Standby” key for 3 seconds while still in the direct selection menu, the system
switches from this menu to the normal mode.
FIN
appears briefly in the display
to indicate that the iR learning mode has ended.
Note:
Due to the variety of infrared codes it is not possible to guarantee that every iR
remote control signal can be learned by the DM system. Signals from radio frequency
(RF) remote controls cannot be learned!
