Innovative Lighting Products
Followspot Operating Instructions
V 1.0 1/11/22
49
1092 West Atlanta Street, SE • Suite 600 • Marietta, GA 30060 • 888-252-5912 • [email protected] • cantousa.com
13: REPLACING THE FUSE
Step 1:
Turn off power (A) to the LED followspot and unplug the power cable (C) from the back panel of the base body.
*NEVER WORK INSIDE AN OPERATING UNIT WITHOUT IT BEING COOLED AND UNPLUGGED FROM POWER
SOURCE. NEVER EVER WORK INSIDE A UNIT THAT IS TURNED ON.
Step 2:
Locate the fuse holder (B) on the back panel, to the right of the power input connector and to the left of the power switch.
Step 3:
Rotate the back end of the fuse holder until the back cap comes off completely and the fuse is removable.
Step 4:
Install replacement fuse in place of the old fuse.
Step 5:
Re-install the fuse back into the fuse holder and rotate the back cap until secure.
Step 6:
Plug in the LED fixture power connector, turn on the power switch and ensure the replacement was successful.