CANTERBURY Z3460, Quick Start Manual

Page: 3 / 8

Installation Instructions Model : Z3460
Further information Phone (03) 9761 4603 sales@sinkandtap.com.au
❶
❷
Preparation

Flush out the pipework to remove any foreign
matter.

The hot supply should be on the left when viewed
from the front of the fitting.
Assembly

Connect the hot and cold water supply to the mixer
body
1 , using 1/2” (21mm) adaptors.

Using 1/2“ adapters, connect the shower water
supply pipe and divert pipe to the diverter unit
2 .
3

Insert the mixer cartridge 3 , into the mixer
body opening, ensuring that the alignment
tabs
A , are correctly orientated to ensure
proper location and fit of the cartridge.

Secure the mixer cartridge with the cartridge
nut
4 .

Tighten the cartridge nut with suitable
spanner or smooth jawed shifter.
NOTE: Do not over tighten the nut as this could
damage the cartridge!
Continue……..