- 4 -
ADDITIONAL SAFETY RULES FOR THE
OSCILLATING BELT EDGE SANDER
1.
DO NOT
allow anyone to stand near the sander while sanding wood stock; as throw out is a possibility
always stands to one side of your machine.
2.
DO NOT
jam the work piece against the sanding belt. Firmly grasp the work piece in both hands and ease
it against the sanding belt using light pressure.
3.
DO NOT
wear loose clothing while operating this machine. Roll up or button sleeves at the cuff.
4.
DO NOT
place hands near, or in contact with, sanding belt during operation.
5.
DO NOT
perform sanding operations until the dust collection system is started.
6.
DO NOT
open the guards while the machine is running.
7.
ANY PROBLEM
, with the exception of belt tracking, that is concerned at all with any moving accessories
must be investigated and corrected with the power disconnected, and after everything has come to a
complete stop.
8.
PERFORM
machine inspections and maintenance service promptly when called for.
9.
NEVER
leave the machine running unattended.
10.
REPLACE
sanding belt when it becomes worn.
11.
NEVER
sand more than one piece of stock at a time.
12.
ALWAYS
inspect board stock for nails, staples, knots, and other imperfections that could be dislodged and
thrown from the machine during sanding operations.
CAUTION
⚫
No
list
of
safety
guidelines
can
be
complete.
Every
shop
environment
is
different.
Always
consider
safety
first,
as
it
applies
to
your
individual
working
conditions.
Use
this
and
other
machinery
with
caution
and
respect.
Failure
to
follow
guidelines
could
result
in
serious
personal
injury,
damage
to
equipment
or
poor
work
results.
⚫
Always
wear
a
dust
mask
when
operating
the
Model. Using
this
machine
produces
sawdust
which
may
cause
allergic
reactions or respiratory problems.