- 21 -
MITER GAUGE
The main table has a stationary miter gauge that is used to hold the workpiece at various angles against the
sanding belt. The miter gauge is precisely set on the working table with easy-to-read graduation for the
convenience of sanding. Adjusted as follows:
1.
Loosen the lock handle shown in
Figure 15
.
2.
Rotate the miter gauge to desired position by reading the indicator scale.
3.
Tighten the lock handle loosened in
Step 1
after the miter gauge position is desired.
4.
We recommend using a square to adjust and/or verify the miter gauge scale as shown in
Figure 16
.
Figure 15.
Main table miter gauge
Figure 16.
Setting miter gauge to
90
°
