- 24 -
SECTION 7: MAINTENANCE
GENERAL
This oscillating belt edge sander is designed and manufactured for easy operation and maintenance. Regular
periodic maintenance of your machine will ensure its optimum performance. Make a habit of inspecting your
machine each time you use it. Check for the following conditions and repair or replace when necessary:
1.
Loose mounting bolts.
2.
Worn switch
3.
Worn or damaged cords and plugs
4.
Damaged or worn sanding belt
5.
Any other condition that could hamper the safe operation of this machine
PERIODIC MAINTENANCE
1.
The machine requires thorough cleaning once a day
2.
Check of the auxiliary wheel and drive wheel
3.
Check of screws and bolts
(After the machine has been operated for long period of time the auxiliary wheel and drive wheel may be wear. If
this happens the wheels need to be replaced.)
LUBRICATION
There are 2 grease fittings shown in
Figure 19
. Grease these points after approximately 50 hours of use.
All other bearings are sealed and permanently lubricated, simply leave them alone until they need to be
replaced. Do not lubricate them.
WARNING
Disconnect power to the machine when performing any maintenance, assembly or adjustments. Keep loose
clothing rolled up and keep hair pulled back. Wear safety glasses during the entire operation process. Failure to comply may result
in serious personal injury.
Figure 19.
Oscillation grease fittings
