CanProx Proximity/Keypad Reader
Installation Instructions
August 2018 • Rev. 1.6
Page 9 of 14
CONFIGURATION CARD FOR CANSEC H1000 AND MAP1 OR MAP2
CONTROLLERS
The following is a sample of one of the 4-bit burst configuration cards, which when
presented to the P-640-HA, P-620-HA or P-640-HA37, P-620-HA37 reader will
enable it to use 4-bit burst in keypad mode. This configuration is
only
required
when using the “Keypad Options” modes available in Hurricane software (Card
only, Card plus PIN and PIN only) or “Card + PIN”, “Card + PIN or Keypad Card
ID” options in First Access software.
See “
H1000 Integrated Keypad Installation Guide
” for detailed installation and
configuration instructions for H1000.
Proximity/Keypad Reader Usage
Keypad usage:
enter a PIN number between
1
and
65534
follow by “#”
Reader usage:
present a compatible proximity credential to the reader
NOTE:
Keypad and reader modes are both enabled and cannot be toggled. This
allows the usage for both card users and PIN users.
4-Bit Burst Label
