MAP1
Page 22 of 31
Installation Manual
June 2018 • Rev. 1.6
POWER CONNECTOR
Connections
:
METBA and METBB are for future use. The Shield from METBA and METBB
wire would be connected to METTAM.
TAMPER allows for the connection of an external Enclosure Tamper Switch.
Note
:
The MAP1 has a Tamper MSJx-MicroShunt jumper to the right of this power
connector.
Figure 13
Factory default
:
The Tamper jumper
is set to disabled.
To activate the
Panel Tamper move
jumper to the right
2 pins. Connect the
switch between
TAMPER and the
METTAM on the
connector.
Figure 14
Summary of Contents for MAP1
Page 1: ...MAP1 Controller INSTALLATION MANUAL June 2018...
Page 7: ...MAP1 Page 7 of 31 Installation Manual June 2018 Rev 1 6 MAP1 Controller Layout Figure 1...
Page 13: ...MAP1 Page 13 of 31 Installation Manual June 2018 Rev 1 6 Figure 6 Non Supervised...
Page 14: ...MAP1 Page 14 of 31 Installation Manual June 2018 Rev 1 6 Figure 7 Supervised...
