Cansec MAP1, Installation Manuals

Page: 26 / 31

MAP1 Page 26 of 31
Installation Manual June 2018 • Rev. 1.6
9. The factory default or current password for a new unconfigured MAP1 panel is
Cansec . The password must be changed to something else other than Cansec .
10. Click Save . The panel saves the new settings and reboots for the settings to take
effect.
USB IP CONFIGURATION TOOL
Important : Shutdown Push Button (PB1) must be used to avoid data corruption on the MAP1
controller .
1. If the MAP1 controller is powered on, press and hold the PB1 button for a period
of 5 to 8 seconds and proceed to step 2. Otherwise, proceed to step 4.
2. When the PLM LED on the front of the MAP1 controller begins a rapid flash,
release the Shutdown PB1 button.
Figure 19
Figure 20