preparing module for installation.
Use extreme caution and care when moving and
installing this unit. Use lifting equipment that is rated
for the weight of the unit by an OSHA-certi
fi
ed rating
organization. Personnel should be properly trained
and quali
fi
ed to move and rig equipment
CAUTION:
Risk of sharp edges, splinters and
exposed fasteners. Can cause personal injury.
Only properly trained personnel wearing appropriate
safety headgear, gloves, shoes and glasses should
attempt to move, lift, remove packaging from, or
prepare module for installation
NOTICE :
Risk of overhead interference. Can cause
module or structure damage.
The module may be too tall to
fi
t through a doorway
while on the skid. Measure the module and doorway
heights and refer to the installation plans before
moving the module to verify clearances.
NOTICE:
Risk of improper storage. Can cause
module damage.
Keep the module indoors and protected from
dampness, freezing temperatures and contact
damage.
NOTICE :
Risk of damage from forklift. Improper
handling with the forklift can cause exterior and/or
underside damage.
Keep tines of the forklift level and at a height suitable
to
fi
t below the pallet.
Domestic Packaging
1. Remove the exterior stretch-wrap packaging from
around the module, exposing the protective corner
and side packaging planks.
2. Remove corner and side packaging planks from
the module, exposing the bag over the module.
Remove the bag when ready to install the Front
Cooler.
Planks at the corners and on the sides
protect the Front Cooler during shipping
Remove the Stabilizers at the corners
10
l
Can BREE
ZE
Operating and Maintenance Cooling Unit Instructions 8-14 kW
5.
www.canovate.com
l
l
P. +90 216 484 2222
Exterior stretch wrapping
surrounds other protective
shipping features
