– 10 –
When using as an HDV to HD-SDI converter
Press the [Encode/Decode Switch] on the front panel of the ADVC-HDM1 to turn on
the [Decode Selection LED].
Press the [Encode/Decode Switch] on the front panel of the ADVC-HDM1 to turn on
the [Decode Selection LED].
2
ADVC-HDM1 Input and Output
2-1
Connections and Preparations
TIP
The time code recorded on the HDV is always output as VITC/LTC output.
TIP
There are two SDI output terminals, enabling two devices to be connected and used at the
same time.
From an HDV camera,
deck, etc.
To SDI-IN
When using LTC OUT
To TC IN
b
Make sure that the light comes on
a
Press for more than 1 sec.
ADVC_HDM1_EN.book Page 10 Tuesday, December 19, 2006 9:20 AM
