Canopus ADVC-1000, User Manual

Page: 37 / 44

29 29
29 29
29
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
Basic Instructions Basic Instructions Basic Instructions Basic Instructions Basic Instructions
Info
Inputting nonstandard signal may
cause abnormal SDI outputs and
analog monitor video outputs
exceeding the ADVC-1000’s jitter
attenuation function tolerance
limit. (The relevant error is
displayed on the error status
display screen).
Please set this function to off in
this case.
52 SG audio level
Lets you select the testing audio signal of 1kHz.
LCD Display
Settings Description
-18 dB Outputs testing audio signal of -18dB 1kHz
in color bar output mode.
(Factory default for PAL)
-20 dB Outputs testing audio signal of -20dB 1kHz
in color bar output mode.
(Factory default for NTSC)
61 IEEE1394 clk adj.
Normally, use the setting in place at time of factory shipment (127).
LCD Display
Setting Description
Numerical value Sets specified numerical value (between 0
and 255).
(Factory default: 127)
62 jitter attenuator
Lets you enable or disable the SDI output jitter reduction function.
LCD Display
Setting Description
off Disables jitter attenuation function.
(Factory default)
on Enables jitter attenuation function.