Canopus ADVC-1000, User Manual

Page: 29 / 44

21 21
21 21
21
Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions
Basic Instructions Basic Instructions Basic Instructions Basic Instructions Basic Instructions
14 analog audio mon.
Lets you select any of the following settings related to the
output to the analog monitor audio output connectors.
LCD Display
Setting Description
CH1/2 Outputs audio CH1 and CH2.
(Factory default)
CH3/4 Outputs audio CH3 and CH4.
CH1+3/2+4 Outputs mix of audio CH1 and CH3, and mix
of audio CH2 and CH4.
CH1+2+3+4 Outputs mix of audio CH1, CH2, CH3 and
CH4.
15 SDIout auto-off
Lets you select a control process that automatically stops the SDI
output in SDI
J
DV mode (during DV encoding).
LCD Display
Setting Description
off Doesn’t stop SDI output.
(Factory default)
on Stops SDI output.
Info
When the ADVC-1000’s SDI
connectors (IN and OUT) are
connected to the SDI connectors
(IN and OUT) of your device while
the external sync signal is not
used, set this function to on to
prevent a looped connection of
the SDI signal.