manualshive.com logo in svg

Canopus ADVC-1000, User Manual

Share
Download
Canopus ADVC-1000 User Manual Download Page 19

11

11

11

11

11

Basic InstructionsBasic InstructionsBasic InstructionsBasic InstructionsBasic Instructions

Basic Instructions

Basic Instructions

Basic Instructions

Basic Instructions

Basic Instructions

LTC........................ LTC signal input to TC connector is ac-

quired, and converted into time code in
output DV signal.

When deck control by remote connector is enabled

If the LTC signal input to TC connector is
invalid, LTC acquired through the remote
connector is used.

auto ....................... DVITC signal in SDI video input and LTC

signal input to TC connector are acquired
through the remote connector. If the LTC
signal is valid, the LTC is converted into
time code in output DV signal. Otherwise,
DVITC is converted into time code.

When deck control by remote connector is enabled

If the LTC signal input to TC connector is
invalid, LTC/VITC auto selection time code
is acquired through the remote connec-
tor. If the auto selection TC cannot be ac-
quired, DVITC in SDI video input signal is
used.

3.

 Video standard (Lower right on the screen)

Monitor out:1+3/2+4

TC source:DVITC NTSC

NTSC .................... ADVC-1000 operates in NTSC mode.

PAL ........................ ADVC-1000 operates in PAL mode.

Info

The video standard is set by DIP
switch SW4 on the bottom of the
unit, or by the menu option "19
video standard".
(See "DIP switch settings" on p.15
and "19 video standard" on p.23)

Summary of Contents for ADVC-1000













































Reviews:

No comments

Brands by name

Popular brands

Load more brands